Black Diamond Flex Tips Long Winter 2023
Replacement Flex Tips for Black Diamond's general trekking poles such as the Trekking Pole and the Compactor Pole.
Replacement Flex Tips for Black Diamond's general trekking poles such as the Trekking Pole and the Compactor Pole.
SKU: BD112074-w2023
NOT compatible with the interchangeable Z-Pole Carbide Tips and Z-Pole Rubber Tips. If you want this compatibility you will need Flex Tech Tips instead. Can be used to make a cheap repair of aging Expedition Poles whose tungsten tips have warn out/fallen off - fit over end of pole and tap firmly into place by banging down on a hard surface.
97mm long (including the tungsten tip) and 11mm internal diameter at the top (they are called long because the originals were shorter but these are no longer made).
Friction fit - knock the broken tip off by sliding a hammer smartly down the shaft then fit the new tip and tap it sharply on a piece of wood on a firm surface to seat it.
- Цената на доставка е 5 лв. за цялата страна за 2 раб. дни.
- Доставките се извършват с куриерска фирма ЕКОНТ всеки работен ден.
- Доставката е безплатна за поръчки над 150 лева.
Имате правото да се откажате или да замените получената стока в 14 дневен срок при условие, че е в оригиналният си вид, запазен етикет и не са на лице следи от употреба.
Потребителят има право на рекламация при:
- констатирани липси
- дефекти на стоката
- несъответствие с обявения размер
- несъответствие с обявената търговска марка
При предявяване на рекламация потребителят може да претендира за:
- замяна на стоката с нова
- подмяна със сходен продукт
- възстановяване на заплатената сума
Szczegółowy opis
NOT compatible with the interchangeable Z-Pole Carbide Tips and Z-Pole Rubber Tips. If you want this compatibility you will need Flex Tech Tips instead. Can be used to make a cheap repair of aging Expedition Poles whose tungsten tips have warn out/fallen off - fit over end of pole and tap firmly into place by banging down on a hard surface.
97mm long (including the tungsten tip) and 11mm internal diameter at the top (they are called long because the originals were shorter but these are no longer made).
Friction fit - knock the broken tip off by sliding a hammer smartly down the shaft then fit the new tip and tap it sharply on a piece of wood on a firm surface to seat it.